Built-In Type Door Motor

Product Description

Built-in type door motor
Main facture:
1. Gear-drive type door motor.
2. Input voltage: 220V(110V is alternative); Work voltage: 24V, security and no persona injury.
3. Power failure emergency device: Manual clutch, rotary type operation, door can be locked at optional position, more durable.
4. Movement settings: Mechanical type, door can be open and closed manually while power off, the limite space will not be changed.
5. Security protection devices: Intelligent dynamic fully resistance determination, the door will rebound up and stop when it meet the resistance.
6. The function of setting automatic closing time is available, and the extension of time is 5 minutesthe function of time-delay lamp is available, the time-delay lamp will go out after the door stop.
7. The number of remote controller can be increased and decreased arbitrarily, each motor can equip up to 20 remote controllers, and each remote controller can control several doors at the same time or just one.
8. The motor controller and the motor are separated, its easy to install, operate and repair. And its no need to take down the door when you repair or replace the motor.
9. The internal structure of motor are made of pure metal, long service life.
10.24V reserved power, IR protection and automatic warning function are alternative.

Working environment and condition:
1. Environment temperature: -25C--+50C.
2. Relative humidity (RH): The allowed Max relative humidity is 90%, while the environment temperature is +50C.
3. Power: Single-phase alternating current (AC) 220V 50Hz (110V is alternative). The voltage waviness amplitude range cant exceed ± Of the rated range, and the frequency fluctuation range cant exceed ± Of the reted range.

Technical parameter:
1. Input voltage: 220V(110V is alternative); Working voltage: 24V.
2. Delivered power: 100W; Working noise: Less than 50dB; Maximum hoisting power: 800N.
3. Control mode: Manum, electric, remote control; Unloaded state speed: 25r/min.
4. Rated operating range of remote controller is 30m.

Fault Signature	Reasons	Treatments
The power light of control box on, but the courtesy light and operation does’t work	1. The protective tube is damaged in the control box	1. Replace a new protective tube
	2. No power	2. Check the circuit
	4. The transformer is damanged	3. Replace a new transformer
The power light of control box and courtesy light on, but the motor does not works	1. The NO.5 line that connect limitator and motor loose	1. Reinsert the plug-ins
	2. The NO.3 line that connect limitator and control box loose	2. Reinsert the plug-ins
	3. The NO.2 line that connect motor and control box loose	3. Reinsert the plug-ins
	4. The two slide rods toggle the microswitch simultaneously	4. Readjust the limitator
	5. Incorrect connection between the control box and limitator	6. Connect the circuit correctly
The motor works, but the door does not works	1. Clutch is not interlocking	1. Adjust the clutch handle or screw
	2. Motor gear distress	2. Replace a motor ar motor gears
	3. The spring case is not jammed by motor neck	3. Readjust the motor neck
The door can’t stop moving	1. Incorrect connection between limitator and control box	1. Connect the circuit correctly
	2. The slide rod touch the microswitch excessively	2. Readjust the limitator
	3. Retainer microswitch damaged	3. Replace the microswitch